We are excited to announce the release of our latest product: the InLine Hot Water System.
This will complement the Clear Heater System in your home or office by providing efficient hot water on demand, and just like the Clear Heater System you'll have full control of how much you spend on hot water on a daily or monthly basis via the smart Control Panel.
The new Logicor InLine Hot Water System is designed to replace both the traditional boiler and the storage tank in your home - which depending on your requirements for cooking and other facilities, may remove the need for gas in your home altogether when combined with the Logicor Clear Heater System.
The proportion of household energy used for water heating has increased over the last few years and now stands at approximately 18%*.
Dependant on your system, updating the way you heat your water by installing the Logicor InLine Hot Water System can not only reduce the energy used to heat your water, but can also eliminates the risk of legionnaires’ disease.
Having both the Logicor InLine Hot Water System and the Logicor Clear Heater System installed in your property can also greatly reduce the risk of potential exposure to Carbon Monoxide and Carbon Monoxide poisoning.
*Source: Department of Energy and Climate Change (2013), Great Britain’s Housing Energy Fact File.
Available at: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/345141/uk_housing_fact_file_2013.pdf
Our new Logicor InLine Hot Water System is powered by electricity and has been designed to replace the existing water boiler and storage tank in your home; instantaneously, but only heating the water you actually use. Dependant on your system this can eliminate the need for a storage tank; which not only reduces the energy wasted in heating water which is then not used, but the absence of a storage tank and the consequential ‘standing water’ also eliminates the risk of legionnaires’ disease from a storage tank.
Although the Logicor InLine Hot Water System can run independently as a “stand alone” unit, it has been specifically designed to work in conjunction with the Logicor Control Panel. As the manufacturer, we recommend that the system is not run without the Logicor Control Panel; however if you also have our Clear Heater System installed, a second separate Control Panel is not required - as both systems can be controlled from the same Control Panel unit.
Having both the Logicor InLine Hot Water System and the Logicor Clear Heater System installed in your property may remove the need for gas in your home altogether (dependant on your requirements for cooking and other facilities). As a result, it also greatly reduces the risk of potential exposure to Carbon Monoxide and Carbon Monoxide poisoning.
- Width: 500mm - Height: 470mm - Depth: 90 mm - Weight: Not more than 15kg (depending on accessories) - Colour: Gloss white and chrome. - Mounting: 4 screws mounted to wall
- Max Power: 12kW - Normal operating power: 6kW - Power Supply: Individual cable 12mm back to the main distribution board with circuit breaker protection rated to 63A. - Max operating pressure: 4 bar. - Maximum operating temperature 46 °Celsius. - Temperature selection: 30 °Celsius to 46 °Celsius in increments of 0.1 °Celsius. - Heating elements: Multiple element product with individual control over power. - Heating method: In line electric. - Output flow: Dependant on input but on average 6litres/min (software controlled). - Maximum heating water volume per day: User defined in litres. .
As the manufacturer of the system, we recommend that the InLine Hot Water System is not run without a Logicor Control Panel, as the Control Panel will enable the customer to monitor and change the settings of the new system; however if you are an existing Clear Heater System customer, or you are also having the Clear Heater System installed with the InLine Hot Water System, a second separate Logicor Control Panel is not required.
Both systems can be controlled from the same Control Panel unit and connecting the Control Panel to Wi-Fi will enable automatic software updates via the internet, which will allow the InLine Hot Water System to be added to an existing Control Panel.
The InLine Hot Water System is Bluetooth enabled and also communicates via the electrical ring main in your home or office.
A water scale inhibitor is supplied with all units unless specifically requested not to be.
Water hardness can vary from area to area and even from property to property; as the manufacturer of the system we recommend that in all instances all InLine Hot Water System units should be mandatorily fitted with a water scale inhibitor, to maintain the performance of the system.
Safety Standards approved safety features include an anti-scald valve limiting the maximum output water temperature to 46° Celsius, thermal cut out preventing the unit allowing water above 72° Celsius to pass through it, multiple flow and temperature sensors all controlled from a bespoke minicomputer.
We expect our InLine Hot Water System to last at least 20 years from the date of installation. The Logicor quality control and assurance systems and procedures ensure manufacturing to the highest standard. As the designers, developers and manufacturers of the system, our confidence in the InLine Hot Water System is such that we offer a 20 year guarantee on the product.
The system will use the same control panel as the Clear Heater System.
Both system will operate from the same control panel. As soon as your control panel and InLine Hot Water units are plugged in to a standard wall socket they are ready to communicate with each other using the electrical mains wiring in your home.
App available for Smart Phones
The Logicor Products Application is an application designed to allow the user to take full advantage of their Logicor products. This includes the Clear Heating System (CHS), the InLine Hot Water System (ILHWS), the Logicor whole house energy meter (E-meter) and the soon to be available lighting products.
This Application will allow users to see the associated energy usage of their individual Logicor products on their phones and tablets from anywhere in the world. This extends to selecting a date range over which the average energy usage can be viewed or just a single day.
The Application also allows the users to e-mail the Logicor office, with a single button push, for general enquiries as well as e-mailing Technical Support to ascertain the answer to a technical question they may have.
The Application also allows for users to telephone the office or technical support direct with a single button push. In both instances they get to speak to Logicor staff in the office.
Users have the ability to see their energy usage data in a list or in graphical form in an easy to view format.
The Logicor Products Application will be expanded every few weeks to include new features such as user notification of potential faults, monitored FireGuard incorporating CO2 detection, FrostGuard triggers, predictive energy usage, CHS and ILHWS graphs showing total system usage hourly across a day, energy purchasing/payment, monitored household burglar alarm, total household energy usage data from the e-meter, and much, much, more.
CHS & ILHWS: PCT/GB2018/050571